Horley · Surrey
Safety Glass in Horley
We cover Horley and Surrey for toughened and laminated glass, supplied ready to fit or measured and installed by our glaziers.
- RH6
- Guide from £55
Toughened glass panels in Horley: what to know
BS EN 12600 classifies safety glass by a pendulum impact test, with class 1 the highest and class 3 the lowest. In England, critical locations generally need at least class 3, and door or side panels wider than 900mm need class 2 or better.
Toughened glass is ordinary float glass that has been cut to size, heated and then cooled quickly with jets of air. This leaves the surfaces in compression, making it several times stronger than untreated glass of the same thickness. When it does break, it crumbles into small, relatively blunt pieces.
The price of safety glass depends on its size, thickness, whether it is toughened or laminated, the edge finish, the number of holes and cut-outs, any shapes or curves, and whether it is supplied only or fitted. Low-iron or tinted glass costs more than clear float.
Low-iron glass removes most of the slight green tint that ordinary clear glass shows at its edge and through thick panels. It suits tabletops, display shelves and splashback-style panels where true colours and a clearer edge matter.
What's included
- Written quote fixing the price for the specification
- Glass cut, edge-worked and drilled before toughening
- Delivery or fitting by our glaziers
- Advice on toughened or laminated glass for the location
Local details for Horley
- Postcodes covered
- RH6 and the surrounding area, including Crawley, Redhill and Reigate
- Coast
- Horley is well inland, around 38 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Horley the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 62° and 16.3 hours in midsummer. Strong sun on large glass panels can cause glare and fade furniture behind them. Tinted, solar control or low-iron toughened glass each change how much light, heat and colour come through, so orientation is worth considering when choosing.
- Access and setting
- Older rural homes often have internal doors and screens with old, unmarked glass. Upgrading them to toughened or laminated safety glass is common, and timber door frames may need careful beading when the new glass is fitted.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Horley
| Typical job | Guide price inc VAT |
|---|---|
| 6 mm toughened panel, 800 × 600 mm | £55 – £75 |
| 10 mm toughened panel, 1000 × 2000 mm | £325 – £415 |
| Glass tabletop or shelf, 1200 × 600 mm, 8 mm | £135 – £165 |
| 6.4 mm laminated panel, 900 × 900 mm | £115 – £145 |
Get a guide price for your size
Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Options to choose between
Low-iron glass
Extra-clear glass with much less green tint, chosen for tabletops, shelving and panels where colour and edge clarity matter.
Laminated safety glass
Two or more sheets bonded with an interlayer that holds broken glass in place, for overhead, security and fall-risk locations.
Clear toughened glass
Heat-treated float glass that breaks into small, blunt pieces, for doors, screens, tabletops and shelves in a range of thicknesses.
Safety Glass in Horley: questions
How much does toughened glass cut to size cost?
The price depends on the dimensions, thickness, glass type, edge finish, number of holes and cut-outs, any shapes, and whether you want supply only or fitting. Laminated, low-iron and obscure glass cost more than clear toughened. See the guide prices for typical panels, then get a written quote for your exact specification.
Can toughened glass be cut or drilled after it is made?
No. Toughened glass cannot be cut, drilled or edge-worked once it has been toughened, because any damage to the surface releases the internal stress and the whole pane shatters. All sizes, holes and cut-outs must be finalised before toughening. That is why accurate measurements or a template are needed before the order is placed.
Can toughened glass break on its own?
Rarely, yes. Tiny nickel sulphide inclusions in the glass can expand over time and cause a toughened pane to break without an obvious impact. Edge damage during fitting can also cause later failure. Heat soak testing reduces the risk of inclusion-related breakage, and careful handling and correct fitting protect the edges.
Why do I need to wait for toughened glass?
Toughened glass is made to order. Each panel is cut, edge-worked and drilled from float glass, then heated and cooled in a toughening furnace. It cannot be cut from stock once toughened. Your written quote shows the expected timescale, and the glazier will confirm fitting arrangements once the glass is ready.
Do you cover Horley for safety glass?
Yes. We can quote for safety glass across Horley and the surrounding Surrey area, including postcode districts RH6, and nearby Crawley, Redhill and Reigate. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Horley
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.