Bordon · Hampshire
Glass Balustrades in Bordon
Need edge protection for a raised deck in Bordon? We can quote for spigot, post or channel-fixed glass and check the deck frame first so the fixings have something solid to hold.
- GU35
- Guide from £1,095
Glass balcony balustrade in Bordon: what to know
The interlayer inside laminated glass decides how a broken panel behaves. Standard PVB holds the fragments together but can let a fully broken panel sag, while stiffer structural interlayers help it stay upright. The right choice depends on whether a handrail is fitted and how exposed the balustrade is.
BS 6180, the code of practice for barriers, says a handrail should be used where glass guards a drop of more than 600mm, unless the glass is laminated toughened glass that would stay in place if a panel failed. That is why frameless balustrades without a top rail use laminated glass.
The price depends mainly on the length of the run, the number of panels and corners, glass thickness and interlayer, the fixing system, whether a handrail is fitted and how easy the area is to reach. Low-iron, tinted or satin glass and specialist hardware finishes also add cost. See the guide prices for typical ranges.
Where a building may be used by children under five, the guidance in England says guarding should not let a 100mm sphere pass through any opening and should not be easy to climb. Solid glass helps on both counts, but gaps between panels, posts, walls and the floor still need checking.
Included as standard
- Site survey, including a check of the structure behind fixings
- Templating and measuring for made-to-measure glass panels
- Toughened or laminated safety glass to the agreed specification
- Channels, clamps, posts or spigots in your chosen finish
About Bordon for this job
- Postcodes covered
- GU35 and the surrounding area, including Farnham, Aldershot and Fleet
- Coast
- Bordon is well inland, around 30 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Bordon the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 62° and 16.3 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
- Access and setting
- Older rural homes often have uneven floors, timber structures and stone walls, all of which affect how channels and posts are fixed. Exposed decks and hillside terraces also face strong wind, so the glass and fixing system are chosen for that exposure.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Bordon
| Typical job | Guide price inc VAT |
|---|---|
| Frameless, 3 m run | £1,095 – £1,395 |
| Frameless, 6 m run | £2,195 – £2,795 |
| Post and clamp, 6 m run | £1,395 – £1,695 |
Get a guide price for your size
Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.
Choosing your glass balustrades
Low-iron glass
Glass with less iron, which removes the green tint seen on the edges of standard glass, most noticeable in thick laminated panels.
Spigot fixed
Individual spigots hold each panel at its base instead of a continuous channel. Common on decking, around pools and in gardens.
Tinted or satin glass
Grey, bronze or satin-etched glass that adds privacy or cuts glare on balconies and terraces overlooked by neighbours or streets.
Glass Balustrades in Bordon: questions
How high does a glass balustrade have to be?
In England, the minimum height in a single-family home is 900mm for stairs, landings and internal floor edges, and 1100mm for external balconies, Juliet balconies and roof edges. Other building types have their own heights in the same guidance. Wales, Scotland and Northern Ireland publish separate guidance, so we confirm the figure that applies to your property.
How long does it take to fit a glass balustrade?
Most domestic balustrades take one or two days on site once the glass has arrived. Because toughened and laminated glass is made to measure after templating, there is a manufacturing lead time, often several weeks. Your written quote sets out the expected programme, and we confirm a fitting date once the glass is ready.
What happens if a balustrade panel breaks?
With laminated glass, the broken panel is held together by its interlayer and should stay in place until it is replaced. With toughened-only glass, the panel breaks into small pieces and the handrail becomes the barrier. Either way, keep people away from the edge and contact us so we can make the area safe and remake the panel to size.
Can I fit a glass balustrade kit myself?
Kits are sold for self-fitting, but a balustrade's safety depends on the right anchors, a sound substrate, the correct glass for the system and accurate alignment. Fixing into weak timber or using toughened-only glass in a frameless channel can leave a barrier that fails under load. We supply and fit as one job and check each fixing before handover.
Do you cover Bordon for glass balustrades?
Yes. We can quote for glass balustrades across Bordon and the surrounding Hampshire area, including postcode districts GU35, and nearby Farnham, Aldershot and Fleet. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Bordon
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.