Hampshire · England
Safety Glass in Hampshire
Is the glass in your doors in Hampshire marked as safety glass? We can check and quote to replace it with toughened or laminated glass.
- Guide from £55
- 18 towns covered
- Postcode areas BH, GU, PO, RG, SO, SP
Safety glass for doors in Hampshire
Glass tabletops and shelves need the right thickness for the span and load. Thicker glass deflects less, so a long shelf or a large table needs a heavier panel than a small side table. The supplier confirms a suitable thickness for the use, not just the size.
When measuring for a replacement panel, measure the opening or old glass in at least two places for width and height, and note the thickness. For anything with holes, curves or angled corners, a hardboard or card template gives the most reliable result.
Toughened glass can, in rare cases, break without any obvious impact because of tiny nickel sulphide inclusions in the glass. Heat soak testing exposes the toughened glass to heat for a set period to break susceptible panes before supply, which reduces the risk without removing it completely.
In England, Approved Document K requires safety glass in critical locations: glass in a door or within 300mm of a door edge, up to 1500mm above the floor, and other glass within 800mm of the floor. The rules are similar elsewhere in the UK, but the detail differs.
Towns we cover for safety glass in Hampshire
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Hampshire
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Hampshire has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Near the coast, salt spray can mark exposed glass edges and corrode metal fixings. Polished edges and sealed laminated edges cope better outdoors, and stainless steel clamps and hinges are worth specifying for external safety glass panels and screens.
In flats and city buildings, large panels of safety glass may need to fit through narrow stairs, lifts and doorways. Measuring access routes at the survey avoids problems, and laminated glass suits ground-floor doors and screens facing the street.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| 6 mm toughened panel, 800 × 600 mm | £55 – £75 |
| 10 mm toughened panel, 1000 × 2000 mm | £325 – £415 |
| Glass tabletop or shelf, 1200 × 600 mm, 8 mm | £135 – £165 |
| 6.4 mm laminated panel, 900 × 900 mm | £115 – £145 |
Choosing your safety glass
Satin or obscure finish
Acid-etched or patterned glass for privacy in doors and screens, toughened or laminated to meet safety requirements.
Holes and cut-outs
Drilled holes for handles, hinges and fixings, and cut-outs for sockets, all made before the glass is toughened.
Clear toughened glass
Heat-treated float glass that breaks into small, blunt pieces, for doors, screens, tabletops and shelves in a range of thicknesses.
Laminated safety glass
Two or more sheets bonded with an interlayer that holds broken glass in place, for overhead, security and fall-risk locations.
Safety Glass in Hampshire: questions
Can toughened glass break on its own?
Rarely, yes. Tiny nickel sulphide inclusions in the glass can expand over time and cause a toughened pane to break without an obvious impact. Edge damage during fitting can also cause later failure. Heat soak testing reduces the risk of inclusion-related breakage, and careful handling and correct fitting protect the edges.
Can toughened glass be cut or drilled after it is made?
No. Toughened glass cannot be cut, drilled or edge-worked once it has been toughened, because any damage to the surface releases the internal stress and the whole pane shatters. All sizes, holes and cut-outs must be finalised before toughening. That is why accurate measurements or a template are needed before the order is placed.
How much does toughened glass cut to size cost?
The price depends on the dimensions, thickness, glass type, edge finish, number of holes and cut-outs, any shapes, and whether you want supply only or fitting. Laminated, low-iron and obscure glass cost more than clear toughened. See the guide prices for typical panels, then get a written quote for your exact specification.
Why do I need to wait for toughened glass?
Toughened glass is made to order. Each panel is cut, edge-worked and drilled from float glass, then heated and cooled in a toughening furnace. It cannot be cut from stock once toughened. Your written quote shows the expected timescale, and the glazier will confirm fitting arrangements once the glass is ready.
Which parts of Hampshire do you cover for safety glass?
We cover the whole of Hampshire, including Southampton, Portsmouth, Basingstoke, Gosport and Waterlooville, and postcode areas BH, GU, PO, RG, SO, SP. Building rules for safety glass here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Hampshire
- Replacement Glass in Hampshire
- Misted Glass Repair in Hampshire
- Emergency Glazing in Hampshire
- Window Repairs in Hampshire
- Window Film in Hampshire
- uPVC Windows in Hampshire
- Aluminium Windows in Hampshire
- Sash Windows in Hampshire
- Composite Doors in Hampshire
- Bifold Doors in Hampshire
- Sliding Doors in Hampshire
- Secondary Glazing in Hampshire
- Roof Lanterns in Hampshire
- Glass Balustrades in Hampshire
- Frameless Glass in Hampshire
- Shower Screens in Hampshire
- Glass Splashbacks in Hampshire
- Bespoke Mirrors in Hampshire
- Glass Roofs in Hampshire
- Shopfront Glazing in Hampshire
- Curtain Walling in Hampshire
- Glass Partitions in Hampshire
- Property Glazing in Hampshire
All glazing in Hampshire · Toughened & Laminated Safety Glass across the UK
Get a written quote in Hampshire
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.