Call 0800 088 6248

Hampshire · England

Misted Glass Repair in Hampshire

Misted panes in Hampshire can usually be fixed by swapping the sealed unit alone, keeping your existing frames and avoiding the cost of new windows.

  • Guide from £155
  • 18 towns covered
  • Postcode areas BH, GU, PO, RG, SO, SP

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

About misted double glazing in Hampshire

Common causes of seal failure include water sitting in the frame rebate because drainage holes are blocked, units fitted without correct packers, strong sun on dark frames, and age. Clearing the drainage slots in the frame helps protect the new unit from the same problem.

Replacing a misted unit is usually a short job per window once the new unit has been made. The old unit is lifted out, the frame rebate and drainage cleaned, and the new unit set on packers so the weight is supported and any opening sash stays square.

Early seal failure often shows only on cold mornings or after rain and clears during the day. As the desiccant fills, the mist lasts longer and white mineral staining can form on the inner faces. Staining inside the unit cannot be removed by cleaning from either side.

The price of replacing misted units depends on the size of each unit, the glass specification, any bars or decorative features, how many units are done together, and access. Several units on one visit usually cost less each than separate visits for single windows.

Window with one misted double glazed pane beside a clear pane

Towns we cover for misted glass repair in Hampshire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Hampshire

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.

Hampshire has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Salt air and wind-driven rain put extra strain on sealed unit edges in coastal homes. Keeping frame drainage clear and gaskets in good order matters more, and the glazier checks both so the replacement unit is not sitting in trapped water.

In flats and terraced streets, replacing misted units often means planning access, parking and carrying units up stairs. Upper-floor windows may need to be done from inside, and conservation areas may require matching bars or glass patterns.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
One misted unit, 600 × 900 mm£155 – £195
Two misted units, 600 × 900 mm£305 – £395
Four misted units, 600 × 1100 mm£685 – £875
Misted unit in a door, toughened£305 – £385

Choosing your misted glass repair

Toughened safety unit

Both panes toughened, for misted units in doors, beside doors or low down where safety glass is required.

Georgian bar or leaded

Decorative bars or lead designs remade to match the originals so the new unit lines up with neighbouring windows.

Obscure glass unit

Patterned glass for bathrooms, landings and front doors, chosen to match existing obscure panes or to add privacy.

Laminated safety unit

A unit with laminated glass that holds together if broken, useful for ground-floor security and safety in critical locations.

Misted Glass Repair in Hampshire: questions

Does misted double glazing lose heat?

A misted unit usually insulates less well than when it was new, because any insulating gas in the cavity has escaped and been replaced with damp air. The mist itself also reduces clarity. Replacing the unit restores a sealed cavity, and choosing a low-E unit can improve on the original performance where the old unit was plain glass.

How can I stop new sealed units misting early?

Keep the drainage slots at the bottom of the frame clear, so rainwater does not sit around the unit edges. Avoid pressure washing the seals, and do not paint over glazing gaskets. Check that opening sashes close properly, as a dropped sash can stress the unit. Report any cracked beads or failed gaskets early.

Why has condensation appeared between my double glazing panes?

Condensation between the panes means the edge seal of the sealed unit has failed. Damp air has got into the cavity, and the drying agent in the spacer bar can no longer absorb it. The cause is often age, water sitting in the frame, poor packing or strong sun on the frame. The fix is to replace the sealed unit.

How much does it cost to replace a misted sealed unit?

The cost depends on the size of the unit, the glass type, any Georgian bars, leaded or obscure features, how many units are done together, and access to the window. Larger units, safety glass and upper-floor windows cost more. See the guide prices for typical sizes, then get a written quote for your exact windows.

Which parts of Hampshire do you cover for misted glass repair?

We cover the whole of Hampshire, including Southampton, Portsmouth, Basingstoke, Gosport and Waterlooville, and postcode areas BH, GU, PO, RG, SO, SP. Building rules for misted glass repair here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Hampshire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote